Why Use An Automated Washer?
The advantages of automated washing systems over traditional manual cleaning are recognized by the CDC and independent research and testing organizations. If itís not clean, it canít be sterilized. SciCan offers the tabletop HYDRIM C51w instrument washer and the newly redesigned floor model HYDRIM L110w to meet the needs of your medical clinic.
Key benefits to your dental practice are:
Virtually eliminates hand scrubbing
Protect staff against the hazards of skin puncture and aerosolized contaminants from manual or ultrasonic washing, manual rinsing and manual drying.
Save valuable time-
Spend less time on meticulous manual cleaning.
Third party cleaning validation indicates 99.9% protein removal-
HYDRIMíS powerful circulation pumps and wash arms, combined with SciCanís HIP chemical, result in exceptional cleaning performance.
HIP chemical is a proprietary blend of surfactants (Surface Acting Agents), which are substances that reduce the surface tension of the water and increase its ability to lift debris from instruments. Your valuable instruments are cleaned and protected with HIP!
Consistent repeatable cycles-
Ensure that every set of instruments receives the same validated cleaning process, without the variability inherent in manual scrubbing and ultrasonic cleaners.
Fresh water and chemical for each load-
A precise amount of liquid cleaning solution is dispensed automatically. In contrast with ultrasonic cleaners, HYDRIM uses fresh water for each cycle.
Easily adaptable for either loose instruments or cassettes-
Accommodates your current instrument management procedures.
The HYDRIMĆ Washing System-
Prior to placing instruments in the HYDRIM, remove gross debris. Then load instruments in cassettes or baskets, place in the HYDRIM, and press start. HYDRIMís rapid cycles wash, rinse and dry your instruments, preparing them for sterilization in STATIMĆ or other autoclaves. The HIPTM chemical (HYDRIM Cleaning Solution with Instrument Protection) has been carefully formulated to provide outstanding compatibility with a wide range of materials and coatings. HIP is automatically added at various stages in the cycle to optimize the cleaning and protection of instruments. Independent testing indicates 99.9% protein removal ó far beyond the level detectable with the naked eye!
Speed, durability, proprietary chemical and software; these are the elements that combine to make HYDRIM the best instrument washing system available.
Ease of Use:
Large window in the door allows operator to observe the cycle
Capacity and Cycle:
10-cassette (8" x 11") capacity
Easily configured for loose instruments and various cassette sizes
Fast wash cycle and efficient water use
Mechanical and Consturction:
Active drying system consisting of heater and blower dries instruments rapidly and prevents corrosion
Stainless steel 304 construction, designed specifically for professional use
Integrated liquid chemical dosing system asssures accuracy, minimizes user intervention and requires no additional cabinet space
(w x h x d) 600 x 850 x 600 mm
(23.75" x 33.5" x 23.75")
Depth with Door Open 1200 mm / 47"
Weight 80 kg / 176 lbs.
Rinse and Hold 9 mins.
Regular Wash + Dry 16 mins. + 10 mins.
Heavy Duty Wash + Dry 25 mins. + 10 mins.
*Actual cycle times will vary with incoming water temperature and pressure.
Water Consumption Per Cycle:
Rinse and Hold 11.5 litres / 3 gallons
Regular Wash 19 litres / 4.75 gallons
Heavy Duty Wash 25 litres / 6.25 gallon
North America 208 -240V, 10A, 60Hz
Running Noise 60dB (wash)
Water and Drain Connections:
Hot and Cold Water Tap Connection 3/4"" Garden hose, male
Recommended Hot Water Temperature 50_C to 70_C / 122_F to 158_F
Cold Water Temperature < 30_C / 86_F
Inlet Water Pressure 1 -10 bar / 14.5 -145 psi
Drain 2 cm / 3/4""
Cleaning Solution Dose Per Cycle 120 mL / 4 fl. oz. (HD)
Water Softener Capacity 1 kg / 2.2 lbs. salt
Includes 5-cassette rack (full size),
5-cassette rack (half size),
basket with hinged lid,
and hygiene basket